Friday, March 14, 2014

PDMS COMMANDS

PIPING COMMANDS





  1. AXES AT CE
  2. ADD ALL PIP
  3. REM ALL PIP
  4. MOVE U THROU IDP@
  5. MOVE E THROU IDP@
  6. MOVE W THROU IDP@
  7. MOVE N THROU IDP@
  8. MOVE S THROU IDP@
  9. Q DTXR  (To See Name Of Component)
  10. Q STEXT
  11. STEXT ‘NOTE’  (Naming For Attachment)
  12. Q ATT  (To see the attributes)
  13. REPR INSU ON/OFF UPDATE
  14. Q ISPEC (To see the insulation)
  15. ISPEC NULREF (To Remove the Insulation)
  16. CONN NEXT (Connection to next element)
  17. FCONN (For force connection)
  18. DIST 500
  19. AXES AT PH (To see Axes of Pipe Head)
  20. AXES AT PT (To see Axes of Pipe Tail)
  21. AXES OFF
  22. BY U 500
  23. BY D 500
  24. BY E 500
  25. BY W 500
  26. BY S 500
  27. BY N 500
  28. Q NAME
  29. ROTATE BY 45 (Rotated command)
  30. ROT BY 90 ABOUT Z THRO ID@  (Rotated)
  31. Q PARA (To check nozzle size)
  32. Q CATREF (To See nozzle Rating)
  33. Q POS IN WORLD
  34. CH CE  (check current element)
  35. Q SPREF (check piping Spec)
  36. Q ORI (To see the orientation)
  37. DIR D (Direction Down) U E W N S (For elbow, tee, valve)
  38. Q P1/P2/P3 (To see pipe Bore Direction Connection type and Position)
  39. Q HBORE
  40. Q TBORE
  41. Q LBORE
  42. NEW BRA COPY PREV BY E/W/S/N/U/D 100
  43. Q U (To see the elevation)
  44. Q ANGLE (For change the angle)
  45. THRO NEXT (To connect element to next component)
  46. Q LTLE (To cheek pipe length)
  47. Q MEM
  48. Q RTEX OF DETREF (To see element type and detail)
  49. CONN IDP@ TO IDP Q CE
  50. Q PL (For Direction and position)
  51. BRA CONN PH TO FIST MEM
  52. BRA CONN PT TO NOZZ ID@
  53. BRA CONN PT TO LAST
  54. RAD 500 (Control Valve Radius)
  55. HEI 500  (Control Valve Height)
  56. BACK (Backward)
  57. FORW (Forward)
  58. For Drain pipe
    1. ADD ATT (For isometric note)
    2. Q ATT
    3. TCONN OPEN
    4. Q STEXT
    5. STEXT ‘DRAIN POINT’
  59. For Slope Line /Rotated Elbow
    1. FORWARDS (Select in piping components)
    2. DIR TOW NEXT
    3. BACKWARDS (Select in piping components)
    4. DIR TOW NEXT
  60. MTOC DOTD  (Do not want in bill of material) You can see the Doted DOTD
  61. MTOC ON (Want in bill of material)
  62. MTOC OFF (Don’t Want in bill of material)
  63. Q PA BOP/TOP (To see the pipe BOP/TOP)
  64. Q LSTUBE  (To Change the spec Brake)
  65. Q PSPEC (To see the pipe spec)
  66. CONN PH TO P3 OF ID@ ( AND SELECT THE PIPE P3)
  67. CONN PT TO LAS MEM
STRUCTURE COMMANDS.
  1. AXES AT POSE/S (end or start)
  2. Q POSE WRT/*
  3. EXTE END BY D 500 WRT/*
  4. EXTE START BY U 500 WRT/*
  5. EXTE END/START THRO ID@
  6. EXTE END/START THRO IDPL@  (PL-Pline)
  7. Q CUTL (To see length of section)
  8. Q POS PPLINE BOS IN/* (BOS TOS NA)
  9. ADD ALL STR
  10. REM ALL STR
  11. Q ATT
  12. BY U//D/E/W/N/S 500
  13. Q DRNS DRNE
  14. DRNSTART S 45 E (Direction and angle)
  15. DRNEND S 45 W (Direction and angle)
EQUIPMENT COMMANDS.
         
  1. REM ALL EQUI
  2. ADD ALL EQUI
  3. MOVE U THROU IDP@
  4. MOVE E THROU IDP@
  5. MOVE W THROU IDP@
  6. MOVE N THROU IDP@
  7. MOVE S THROU IDP@
  8. REPR HOLES ON/OFF UPDATE
  9. REPR OBST ON/OFF UPDATE
  10. To Include Equipment in another zone
    1. VAR1 NAME
    2. INCLU $V1 
  1. BY U//D/E/W/N/S 500
  2. NEW BOX COPY PRE
  3. NEW BOX XLEN 400 YLEN 250 ZLN 150
  4. NEW CYL COPY PRE
  5. NEW PYRE COPY PRE
  6. NEW NOZZ COPY PRE
  7. NEW BOX COPY PRE ROT BY 90 ABOUT Z THRO IDP@
OTHERS COMMANDS

  1. For copy equip/sub equipment from one project to another project.
    1. FILE /FILE NAME.TXT
    2. OUTPUT CE
    3. TERM
  1. For pest equipment / sub equipment from one project to another project.
a.       $M FILE NAME.TXT



  
  1. For Undo Command
    1. MDB NOUPDATE
    2. EXIT
  2. Mdb Update
    1. MDB UPDATE
    2. USER PROMQAMQA/MQA
    3. /SUFN
    4. EXIT
  3. UNCLAIM CE
  4. UNCLAIM ALL
  5. ALPHA REQ CLEAR  (To clear the command screen)
  6. CREATE NEW ZONE/SITE/EQUI
  7. ADD ALL WITHIN VOL CE 100
  8. Q ORI (To see the orientation)
  9. ALPHA LOG /C:/ANANT.TXT (To make command line file)
ALFA LOG END
  1. SAVEWORK
  2. Q US (User name)
  3. Q MDB (Multiple data base)
  4. Q REF
  5. RECREATE DISPLAY /ABC.TXT  (For save Display)
  6. $M ABC.TXT (For restore Display)
  7. Q UNITS
  8. Q DISPLAY
  9. Q BANNER (To Check the version number)
  10. Q BANNER FULL
  11. Q TEAM (PDMS user name)
  12. Q USER (Logging name)
  13. Q DBNAME (To check DB name)
  14. Q DBTYPE
  15. Q DBFNUMBER
  16. Q DBFILE
  17. Q LASTMOD
  18. Q SESSMOD
  19. Q SESSMODI
  20. Q USERMODI
  21. Q LASTMODI HIER
  22. Q DRAW
  23. Q DRAW COUNT
  24. Q DRAW FULL
  25. STATUS
  26. SYSTAT (Gives you information about the current active Status of the project)
  27. recre disp /gggg over  (U can save as a display or u can do like this) $m gggg
40.  FILE /C:/AAA OVER
OUTPUT NEW CEV
TERM ENTER
$M /C:/AAA

Posted by at

3 comments:

  1. UnknownSeptember 11, 2019 at 2:50 AM

    HOW TO MAKE MTOC AND MTOT OFF
    EVERY SINGLE COMPONENT TAKE A TIME TO MAKE MTOC OFF
    HOW TO USE AT BRANCH.

    ReplyDelete
  2. vijay chauhanJanuary 4, 2020 at 4:57 AM

    HOW TO COUNT NUMBER OF ELBOW IN BRANCH BY COMMAND IN PDMS DESIGN

    ReplyDelete
  3. ASHISHApril 24, 2020 at 2:48 PM

    HOW TO EXTRACT LINE LIST

    ReplyDelete

Subscribe to: Post Comments (Atom)